XDI High Pressure Fuel Pump & Injectors | Ford 3.5L Gen 1



Our GDI high pressure fuel pumps were developed to replace the Denso OEM high pressure pump.
They deliver up to 80% more fuel flow (with upgraded low pressure fuel system).
Maximum Fuel Pressure is 250bar / 3625psi, this is 66% more than the OEM pump at 150bar.
The kit comes with the HPFP and an electric pigtail. Installation takes less than an hour!

Straight E85 GDI only !!!

no meth, no PFI, no extra ECUs, no wiring, full control, full OBD Diagnostics.

Product total
Options total
Grand total
SKU: N/A Category:


Maximum Rail Pressure 200bar / 2900psi (XDI-HPFP35)250bar / 3600psi (XDI-EVO)

260bar / 3800psi (XDI-HPFP60)

Fuel Compatibility: all known fuels, all Ethanol blends

Electric Connector: Bosch Compact 2-pin

Driver Profile: XDI, tuning changes needed

Accessories: electric pigtail


Geometric Pump Capacity
1.51cc (HPFP35/EVO) bolt on pump
1.81cc (HPFP60) bolt on pumpHousing material: stainless steel, hard coated Aluminum


Injector Information

Our 100% XDI manufactured and tested DI-Injectors are designed for the 2010-2019 Gen 1 3.5L Ecoboost series engines. These injectors supply the required fuel flow for high horsepower applications without the need for auxiliary fuel systems.
Every Injector gets tested at 100bar and 200bar on OEM testing equipment at XDI. Every set gets flow matched to within ±1% at 100bar and 200bar fuel pressure !!!

2000cc, 50% greaterflow over stock

OEM Spray Pattern

OEM Idle Characteristics

No meth, no PFI, no extra ECUs, no wiring, full control, full On Board Diagnostics. Just raw power through proper fueling.

Additional information

Weight 25 oz
Select Pump

No HPFP, 35, EVO, 60

Select Injectors

No Injectors, 2000cc Injectors


There are no reviews yet.

Be the first to review “XDI High Pressure Fuel Pump & Injectors | Ford 3.5L Gen 1”

Your email address will not be published. Required fields are marked *