SPEED PERF6RMANC3 Port Injection Fuel Kit For Ford Ecoboost 2.0/2.3L

Description

The stock fuel pump is good for up to ~600-620 WHP on E50 which we have tested and confirmed countless amounts of times on our builds. This kit also includes 4 Bosch high impedance 630cc injector’s. These are not modified 300cc injectors that flow 630cc’s, but actual factory Bosch 630cc injectors. They have a 30 degree cone shaped spray pattern which provides instant atomization as the fuel exits the tip of the injector. If your trying to make more than 650whp on a 50/50 e85 or more mixture, please choose the 1000cc injector option. If you have any questions please contact us before ordering.

Our kit also comes with 4 bungs for meth nozzles on the bottom of the spacer to allow you to run both water/methanol for octane/cooling and the additional injectors for added fueling. If you dont want to ultilize this at all or right away, we include 4 plugs for these holes as well.

We added a Plug-N-Play harness option for the coil packs so that you dont have to cut and splice your coil pack harness to wire in the Aux Injector Controller for an RPM Signal. Just plug in the harness to all 4 coil packs and then plug the controller into the harness and thats it! This is only available with our kit and each Aux Injector Controller is specifically made for us to accommodate this.

There has been much debate about the type of hose to use for applications that require resistance to corrosive fuel such as ethanol, methanol, and certain types of race gas. Our kit utilizes a synthetic rubber hose from Aeroquip that has a rating of “excellent” which means that ethanol has little to no effect on the degradation of this hose. Most other manufacturers will tell you their hose is “compatible” with ethanol but should be checked regularly for signs of wear. You can be sure that we went the extra mile to bring you a product that will last for years to come.

The full contents of the kit Include:

• All necessary Russell/Aeroquip AN fittings
• Aeroquip E85 rated fuel hose
• Optional Plug-N-Play Harness
• 4 Bosch 630cc Injectors
• Auxilliary Injector Controller
• 4 New OEM Intake Manifold O-Rings
• Full Color Instructions

NOTE:

This kit typically up to 5 business days to build depending on what parts we have in stock. (***ITEM MAY TAKE TAKE LONGER TO SHIP AS MANUFACTURERS HAVE SLOWED DOWN PRODUCTION DUE TO SUPPLY CHAIN ISSUES***)

Please keep in mind that this kit is NOT “Plug N Play”. The HARNESS is Plug N Play. Everything else would need to be mocked up and measured for the best custom fit to work around each setup!