Anderson Composites

– Direct-fit upgrade for 2015-2017 GT, EcoBoost and V6 Mustangs
– 3″ cowl hood with OE-style heat extractors
– Manufactured from premium-quality wet carbon fiber
– Lightweight but sporty design for a custom, sporty feel
– Finished with durable high-gloss for added shine
– OE-style replacement reuses factory hardware and mounting locations



Out of stock



Type-CJ double sided carbon fiber 3 inch cowl hood for 2015-2017 Ford Mustang
-Fits EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, V6

*Carbon fiber “skeleton” bonded to underside of carbon fiber hood – reduced weight
*Vacuum infused process with 3K, 2×2 twill carbon fiber cloth, gloss finish
*OE hood vents cannot be removed
*Fitment locations for the O.E. windshield washer spray nozzles are not provided due to 3 inch cowl hood design.
*Mounts with OE hardware
*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins
*Heat shield required
*Hoods are hand crafted and weigh approximately 18.5 lbs. (stock hood weighs 31 lbs.)
*Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.
*Anderson Composites does not suggest re-installing gas shocks/dampers/struts
*The use of a hood prop rod is highly recommended
*Shipped via ground truck freight only

*Please be sure to review our Terms and Conditions before placing your order.

WARNING: California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm. For more information go to

*This hood will NOT fit the GT350 or GT350R.
*This hood does NOT allow use of 2016 OE hood turn signals.
*We does NOT recommend installing this hood on models manufactured for sale outside of the US due to the factory integrated active hood safety feature that is built into the OE hood hinges on those Mustang models.


Please Note: Fitment locations for the OE windshield washer spray nozzles are not provided due to the three-inch cowl hood design.

Anderson Composites specializes in fiberglass and carbon fiber components for late-model Mustangs. They manufacture each and every one of their products with the utmost attention to detail and only use top-grade materials for a quality product you can trust. Their extensive manufacturing experience allows them to construct everything from hoods, trunk lids, front and rear spoilers, side skirts/splitters and much more. Anderson Composites’ precision and attention to detail used to make their products is a science of its own and their craftsmanship is simply unmatched.

Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. Buyer must retain all cartons, packing materials, and damaged products for the carrier’s damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyers right to make a damage claim may be denied. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.

Additional information

Weight 250 oz
Dimensions 60 × 60 × 6 in


There are no reviews yet.


Your email address will not be published. Required fields are marked *